NCR PX10 POS 7746 - Page 70

Controlled Deployment
4-60 BIOS Setup
Configuration Choices
Configuration Choice
Settings
Notes
DVMT Total Gfx Mem [256M]
Cd Clock Frequency [624 MHz]
GT PM Support [Enable]
PAVP Enable [Enable]
IGD – LCDControl
BIA [Auto]
ALS Support [Enable]
IGD Flat Panel [Auto]
IGD Boot Type [Auto]
Panel Scaling [Auto]
GMCHBLCControl [PWM-Inverted]
Memory Configuration
Memory Scrambler [Enable]
IPU PCIDevice Configuration
IPU Enable/Disable [Enable]
SAIPU ACPI mode [Disable]
Rear Camera [Disable]
Front Camera [Disable]
Rotation [0]
►South Cluster Configuration
► Miscellaneous Configuration
State After G3 [S0 State]
Wake On Lan [Enable]