22
Part
3
-
Setting up and programming the terminal
Bell volume
Margin bell
Auto repeat
Repeat delay
All caps at
power up
You can set the loudness of the keyboard bell. The
possible settings are:
w
Low
Medium
High
You can decide whether or not you want a margin bell to
sound (just as for a typewriter). The settings are:
You can decide at what speed a character should be
repeated when the key is kept pressed down. The choices
are:
Of:
the character is registered only once
Low:
the character is repeated slowly
Medium: the character is repeated rather fast
High:
the character is repeated very fast
You can set a time delay before the key you have pressed
starts to
be
repeated.
The
alternatives are
Low:
The repeat function starts almost
immediately
if
you press and hold a key.
High:
You have to press and hold a key for a
slightly longer time before it starts to be
repeated.
You can decide whether you want the
CAPS
key
(capital letters) to come on automatically when the power
is turned on.
The alternatives are:
Of
Previous setting of the
CAPS
key is
ignored after power has been switched
ojf
OK
Caps will
be
on automatically after power up
To Next Page
Loading...