25
Part
3
-
Setting up
and
programming the terminal
PUSH-key
menu
Press
CTRL+PS
to get the screen picture below.
If
you are in a menu, you must first press 'exit'
(PI).
mpqp]
WITCHE
ADJUST
As mentioned on page
12,
the keys PI
-
P8 can be used as
PUSH-keys, and can be programmed so that you will
need to press only one key to generate frequently used
phrases and commands (PUSH means Programmable
Utility for String Handling).
To program the PUSH-keys, first press 'PUSH
KEY
MENU' (P4), and the following menu appears:
To Next Page
Loading...