8
Horizontal Position
Moves the image to the left or right. Press or to horizontally center the image.
Vertical Position
Moves the image up or down. Press or to vertically center the image.
Sharpness
Press or to adjust the sharpness (focus) of the displayed image.
Overscan
0 = The picture is displayed at the maximum size that will fit on the screen without losing video information.
Picture may have black bars top and bottom or left and right.
1, 2, 3, 4, 5 or 6= Stretch the picture in proportional steps until the screen is filled. The picture’s aspect ratio is not
changed. Some video information may be lost. Select using or buttons.
Video Format
auto = Automatically sets the unit to the format of the connected video source. ntsc = Sets the unit to accept
NTSC video. pal = Sets the unit to accept PAL video. Select using or buttons.
Setting Up the Display
SDI Picture Menu
S-Video Picture Menu
Composite Picture Menu
To Next Page
Loading...
Need help?
General