Section 3: Features
104 Product Description
Ring Groups
Description
Ring Groups determine how trunks ring extensions. Generally, trunks ring extension’s only if Ring
Group programming allows. For example, to make a trunk ring an extension:
● Assign the trunk and the extension to the same Ring Group
● In the extension’s Ring Group programming, assign ringing for the trunk.
Any number of extensions and trunks can be in a specific group. The system allows Ring Groups=1-
100, DSPDB Voice Mail (101) or In-Skin Voice Mail (102).
If an extension has a line key for the trunk, Ring Group calls ring the line key. If the extension
doesn’t have a line key, the trunk rings the line appearance key. If an extension has a key for a trunk
that is not in its ring group, the trunk follows Access Map programming.
Ringdown Extension, Internal/External
Description
With a Ringdown Extension, a user can call another extension, outside number, or Abbreviated Dialing
number by just lifting the handset. The call automatically goes through - there is no need for the user to
dial digits or press additional keys. Ringdown Extensions are frequently used for lobby phones, where
the caller just lifts the handset to get the information desk or off-site Reservation Desk.
After the Ringdown Extension user lifts the handset, ringdown occurs after a programmable interval.
Depending on the setting of this interval, the extension user may be able to place other calls before the
ringdown goes through.
The system allows each extension in the system to have a Ringdown Extension. All extensions can share
the same dialing number, if desired.
Aspire
• Available - 100 Ring Groups.
Aspire
• Available - 512 extensions/virtual extensions and 512 Hotline assignments.
To Next Page
Loading...
Need help?
General
