NEC C751Q - 9 Useful Information and Commands; To Find out the IP Address of the Compute Module from a Terminal Window; To Restart from a Terminal Window; To Shutdown from a Terminal Window

©2018 NEC Display Solutions, Ltd. Page 53 of 71
9 Useful Information and Commands
9.1.1 To find out the IP address of the Compute Module from a terminal window
Use the following command from a terminal window:
hostname –I
Or
ifconfig
9.1.2 To restart from a terminal window
Use the following command:
sudo reboot
9.1.3 To shutdown from a terminal window
Use the following command:
sudo shutdown -h now
9.1.4 To run the Raspberry Pi Config utility from a terminal window
Use the following command:
sudo raspi-config
9.1.5 To change the keyboard layout to US from a terminal window
Either
• Use the following command
setxkbmap us
Or
• Use the following command and select “Internationalization Options”
sudo raspi-config
Select: 5 Internationalization Options
Select: I3 Change Keyboard Layout
Enter