NEC C751Q User Manual

©2018 NEC Display Solutions, Ltd. Page 55 of 71
9.1.8 To install the Python serial module
To install the Python serial module necessary for internal communications with the display.
From Raspbian use:
sudo apt-get install python-serial
9.1.9 To mount a USB flash drive from the terminal
Example:
sudo mkdir /media/usbstick
sudo mount –t vfat –o uid=pi,gid=pi /dev/sda1 /media/usbstick
Replace “sda1” if drive devices is located in another location such as “sdb1”.
9.1.10 To access an SMB (Windows share) drive from the Raspbian desktop
Open a File Manger window. Enter a path into the location bar in the following format:
smb://sharename/foldername
Where “sharename” is the name of the host and “foldername” is the name of the folder being shared.
9.1.11 To list connected USB devices
From Raspbian use:
lsusb
9.1.12 To show available disk space
From Raspbian use:
df -h

NEC C751Q Specifications

General

Brand	NEC
Model	C751Q
Category	Monitor
Language	English