Menu selection
When using the menu method to select a feature, you just need to scroll through the options on screen and confirm your choice with the
key which is also the ‘send’ key.
A
Õ at the base of the options indicates there are more to choose from. Use the or keys to scroll through the menu options.
O
The choice of options available depends on whether the phone is on a call or in standby.
The currently selected option is normally marked by a
> whilst the highlighted option will be selected if you press the key.
O
Pressing the key will return you to the standby screen.
Fastkey selection
The alternative ‘fastkey’ method of selection lets you jump straight to a menu or function without scrolling through the intermediate menu
options. The selections are made by pressing numbers on the keypad which relate to the displayed menus options. This means the required
option does not have to be on the screen to be selected.
If you lose track or make a mistake, just press C to return to the previous menu. If you keep pressing C you will return to the standby display.
Fastkey selection example
Using the fastkey selection method, setting the Autoanswer facility on or off can be carried out as follows:
*
Press 82. The Autoanswer on/off menu will be displayed. The currently selected option will have a >next to it.
*
Press 1 to set Autoanswer to on or 2 to set Autoanswer to off. The appropriate Autoanswer confirmation screen will be
displayed momentarily and then the standby screen will be displayed.
At the start of the section which contains the Autoanswer facility procedure (page 16) an abbreviated form of the fastkey method will be shown
as follows:
Autoanswer 8 2 20
O
The instructions in this user guide usually
make use of the fastkey method and,
where applicable, the fastkey selection for
a function is shown at the beginning of
each section.
15
Redial
1On
2>Off
select
Redial Off current
option
1 Messages
2 View calls
3 Divert
Õ select
Menu with extra options
To Next Page
Loading...
