EasyManua.ls Logo

NEC D400 - Making Basic Calls; Starting, Correcting, and Ending Calls

NEC D400
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Making basic calls
You make a simple call in the same way as you would with a normal phone, except that you need to press the key after entering the
phone number and area STD code. To make international calls you must first enter the international dialling code (see page 9).
Starting a call
*
Open the Flip (if necessary) and key in the phone number. Check the number on the display.
O
Use the full STD area code even if you are in the same town. Long numbers will continue on a second line.
*
Press to send the call.
O
If you do not wish your number to be displayed on the phone you are calling, turn the send own number feature off (see page 8).
*
To abort the call at any time, press briefly or close the Flip (if the Flip option is active - see page 3). The Standby screen
will be displayed.
The display will show you that the system is trying to connect your call and changes as you hear the call established.
When the call is connected the screen displays the number called or your name for the number (if a name has been stored in memory along
with the number - see page 30), the duration of this call so far (if the in-call timer feature is enabled - see page 21), and the signal strength.
Correcting mistakes
*
Use the or key to to scroll through the number then press C to clear individual digits or hold down the C key to
completely clear a phone number.
Ending calls
*
Press (Short press) or close the Flip (if the Flip option is active - see page 3). The phone returns to standby.
Unsuccessful calls
If the call cannot be connected, you will hear a tone. The display will give an appropriate message, and the phone will return to standby. If
your phone is set to Autoredial the number will be automatically called again after a short delay (see page 21).
If a connection is broken, such as by a poor radio signal, then the phone returns to standby. You may also get a warning tone.
$
See also: Phone Number Editing on page
39.
O
Always press or close the Flip even if
the other person has ended the call first.
O
If the key is held down, the unit will
turn off.
6
UK NETWORK
Tue 19 Jan 1999
11:42
In standby ready for
use
UK NETWORK
0123456789
11:42
Phone number on
screen
0123456789
11:42
Trying to connect
Connected
0123456789
11:42
Connected
MEN
U
The other
user is
busy
Unsuccessful call

Table of Contents

Related product manuals