Silent mode & vibration alert
To turn the silent mode and vibration alert on or off together, proceed as follows:
*
Press 72. Press 1 to turn the silent mode and vibration alert on or 2 to turn them off. The silent and vibrator on/off
confirmation screen will be displayed momentarily and then the standby screen will be displayed.
Send tones
If you need to send DTMF tones during a call (e.g. to select options on an automated phone answering service), proceed as follows:
*
Press 75. Press 1 to turn the tones on or 2 to turn them off. The tones on/off confirmation screen will be displayed
momentarily and then the standby screen will be displayed.
Answer key
Your phone will connect to an incoming call by pressing any key (except the key) or by pressing the key only. To set up how you
want to answer incoming calls, proceed as follows:
*
Press 83. Press 1 for any key to answer or 2 for only the key to answer. The answer key confirmation menu will
be displayed momentarily and then the standby screen will be displayed.
Autoanswer
The Autoanswer facility will cause an incoming call to be connected automatically only if you are using your phone as a car phone or with the
simple hands free kit.
*
Press 82. Press 1 to set Autoanswer to on or 2 to set it to off. The Autoanswer on/off confirmation screen will be
displayed momentarily and then the standby screen will be displayed.
O
Autoanswer will only work if your phone is
connected to a car kit or headset.
O
It is recommended that you do not use the
Autoanswer facility if you have the ringer
volume set to off or your phone is set to
the silent mode (see page 19).
O
With Autoanswer set to ‘on’, you have 5
seconds to reject an incoming call before it
is answered automatically.
20
MEN
To Next Page
Loading...
