NEC Dterm DTL-8R-1 - Figure 3-1 Connecting Telephone Cords to the Telephone Jack

3 - 2 Installation
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 D
term
Cordless DECT
To connect the telephone cords:
1. Connect the cord from the telephone jack to the Line In on the D
term
Cordless
DECT.
2. Connect a qualified NEC digital Multiline Terminal to the D
term
Cordless DECT.
Figure 3-1 Connecting Telephone Cords to the Telephone Jack
Figure 3-2 Connecting the D
term
Cordless DECT to the Multiline Terminal
Line "OUT"
To DTU, DTP, DTH, DTR
and DTL Multiline
Telephones
Dterm Cordless DECT.book Page 2 Friday, December 7, 2007 3:48 PM