NEC Dterm DTL-8R-1 - Figure 3-12 Inserting Screws for Wall Mounting; Figure 3-13 Wrapping the AC Adapter Cord Around the Strain Relief

D
term
Cordless DECT Document Revision 1
Owner’s Guide 3 - 9
___________________________________________________________________________________
___________________________________________________________________________________
To mount the charging unit:
1. Insert two mounting screws 1-7/8" apart. Allow 3/16" between the wall
and screw heads for mounting the telephone.
2. Plug the AC adapter into the charging unit. Wrap the AC adapter cord
around the strain relief.
Figure 3-12 Inserting Screws for Wall Mounting
Figure 3-13 Wrapping the AC Adapter Cord Around the Strain Relief
Dterm Cordless DECT.book Page 9 Friday, December 7, 2007 3:48 PM