NEC Dterm DTL-8R-1 - Changing Ringer Type; Menu Setting Mode

D
term
Cordless DECT Document Revision 1
Owner’s Guide 6 - 15
___________________________________________________________________________________
___________________________________________________________________________________
2.16 Menu Setting Mode
Press the TALK key or the Speaker key in each menu setting mode; the
Handset goes into Standby Mode.
The Handset keeps each menu setting mode for one minute without key
operation. The Handset Cancel Menu setting is activated and the handset
goes into Standby Mode.
2.17 Changing Ringer Type
To change the ringer type:
1. Press the MUTE(Menu) key in Standby Mode; the LCD shows the menu
list.
2. If needed, select "Change Ringer Type" by pressing the Volume Up or
Volume Down key and pressing the MUTE(Menu) key. Otherwise, if the
option is already selected, press only the MUTE(Menu) key.
▼
Change Ri nger Type
End
o
f
Ra n
g
e
A
lar
m
Dterm Cordless DECT.book Page 15 Friday, December 7, 2007 3:48 PM