NEC Dterm DTL-8R-1 - Dial Store Mode; One Touch Dial Settings (Option)

D
term
Cordless DECT Document Revision 1
Owner’s Guide 6 - 17
___________________________________________________________________________________
___________________________________________________________________________________
2. Select “End of Range Alarm” by pressing the Volume Up or Volume
Down key and pressing the MUTE(Menu) key.
3. The LCD shows “On” and “Off”. Select “On” or “Off” by pressing the
Volume Up or Volume Down key and pressing the MUTE(Menu) key.
4. The Handset outputs a confirmation tone, displays the confirmation
message on the LCD and goes into Menu List Mode.
2.19 One Touch Dial Settings (Option)
2.19.1 Dial Store Mode
1. Press the MUTE(Menu) key while in Standby Mode; the LCD
displays the menu list.
▼
On
O
f
f
Saved
▼
One Touch Dial Settings
Exit
Dterm Cordless DECT.book Page 17 Friday, December 7, 2007 3:48 PM