NEC Dterm DTL-8R-1 - Page 66

6 - 18 Setup and Operation
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 D
term
Cordless DECT
2. Select “One Touch Dial Settings” by pressing the Volume Up
or Volume Down key and pressing the MUTE(Menu) key.

If the Handset is not in one touch dial mode, it does not show the
“One Touch Dial Settings” menu.
3. The Handset goes into Dial Store Mode and displays the
function key name and the number that is stored. To select one
touch dial 1~2 press the Volume Up or Volume Down key.
When Base Key Option is selected, One Touch Keys 3 and 4
are not available.

If the number is not stored, the 2
nd
line is empty.
4. Press the MUTE(Menu) key; the LCD shows the edit display.

If a 24-digit number is stored, the LCD shows as following in edit
display.
One Touch Dial 1
One Touch Dial 1
123
Dterm Cordless DECT.book Page 18 Friday, December 7, 2007 3:48 PM