D
term
Cordless DECT Document Revision 1
Owner’s Guide 3 - 11
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 6ATTACHING AND REMOVING THE BELT CLIP
A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1. Slide the clip into the tab slots. Press firmly until it snaps into place. The belt
clip is designed to fit snugly onto the handset.
2. To remove the clip, press the retaining clip in toward the belt clip blade and slide
the clip up at the same time.
Figure 3-15 Attaching the Belt Clip to the Handset
Figure 3-16 Removing the Belt Clip
Dterm Cordless DECT.book Page 11 Friday, December 7, 2007 3:48 PM
To Next Page
Loading...
