D
term
Cordless DECT Document Revision 1
Owner’s Guide 3 - 7
___________________________________________________________________________________
___________________________________________________________________________________
2. Plug in and secure the AC adapter.
3. Plug the AC adapter into the base unit.
4. Plug one end of the short telephone cord into the LINE jack on the base
unit. Then plug one end of an NEC multiline telephone into the PHONE
jack. Place the telephone cords inside the molded channels on the
bottom of the wall mount stand.
Figure 3-9 Inserting Screws into the Wall for Wall Mounting the
Telephone
Figure 3-10 Placing the Telephone Cords Inside the Wall Mount
Stand
Dterm Cordless DECT.book Page 7 Friday, December 7, 2007 3:48 PM
To Next Page
Loading...
