6-24 Installing and Using Utilities
BMC ONLINE UPDATE
The optional remote management card includes the Baseboard Management Controller (BMC)
firmware.
The BMC firmware is updated with the BMC Firmware file.
NOTE: When the remote management card is installed in the system,
you can use.
IMPORTANT: Do not turn DC off during BMC Firmware is updated.
The BMC firmware which is renewed becomes effective after
restarting the system.
Update procedure
1.
Insert NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu of NEC EXPRESSBUILDER will be automatically displayed.
2. Select [BMC Online Update].
BMC Online Update installer will be started. Follow the installer directions to install.
To Next Page
Loading...
