9-8 Upgrading Your Server
Processor Air Duct
To install or remove the DIMM or processor, you will need to remove the air duct.
IMPORTANT: Do not assemble the server without installing the air
duct. No duct installed in the system reduces cooling efficiency and can
affect performance or cause damage due to overheating.
Removal
Follow these steps to remove the air duct.
1. See the section "Preparing for Installation and Removal" described earlier to prepare.
2. Position the server unit on its right side.
3. Remove the side cover.
4. Hold the left side of the air duct, and push the right end of the tab to release from the
chassis.
5. Remove the duct from the chassis.
To Next Page
Loading...
