9-48 Upgrading Your Server
Remote Management Card (RMC)
Remote Management card (RMC) is an optional expansion card that includes the Baseboard
Management Controller (BMC) based on IPMI 1.5.
See Chapter 2 for detail functions of RMC.
IMPORTANT: The RMC is extremely sensitive to static electricity.
Make sure to touch the metal frame of the server to discharge static
electricity from your body before handling the RMC. Do not touch the
RMC terminal pins by bare hand or place the RMC directly on the desk.
For static notes, see the section "Anti-static Measures" described earlier.
NOTE: The illustrations in this subsection might slightly differ from
your optional remote management card.
RMC connector
Mother board
To Next Page
Loading...
