2-26 General Description
CD-ROM Drive
Your server is provided with the CD-ROM drive on its front to read data from a CD-ROM (read-
only compact disk). The CD-ROM provides larger and faster data read than the floppy disk.
NOTE: Depending on your order, the DVD-RAM drive may be
installed at the factory.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
■ Do not leave the tray ejected from the CD-ROM drive.
Setting and Removing the CD-ROM
Make sure that the server is powered (the POWER/SLEEP lamp is lit) before inserting a CD-ROM
into the CD-ROM drive.
Press the Open/Close button on the front of the CD-ROM drive to eject the tray. With the CD-
ROM label facing up, place a CD-ROM in the tray gently and securely.
Press the Open/Close button or gently push on the tray front. The tray is automatically retracted
into the CD-ROM drive.
O
en/Close button
To Next Page
Loading...
