9-26 Upgrading Your Server
5.25-inch Device
The server contains four slots in which backup devices including CD-ROM and magnetic tape
drives can be installed.
IMPORTANT:
With the standard configuration, the optional SCSI add-in card and
SCSI cable are required.
Set the SCSI termination of the 5.25-inch device to be installed to
OFF and the SCSI ID to a value which is not duplicated or
corrupted with that of any other device. Refer to the
documentation coming with each of the devices for how to set the
values.
For half-height device, first install a device in slot 1. Then install
another device in slot 2.
For full-height device, install the device to the slots 2 and 3.
This system can include a maximum of two optional file devices.
Slot 3
Slot 2
Slot 1
To Next Page
Loading...
