Installing Windows 2000 E-11
Re-install the Network Driver
After installing OS and deleting the network drivers, if you want to re-install the network drivers,
follow the procedure below.
1. Restart OS and logon to your system.
2. [Upgrade Device Driver Wizard] dialog box appears.
Click [Next].
3. Confirm that the [Search for a suitable driver for my device (recommended)] radio button
is selected and click [Next].
4. Select the [Specify a location] check box and deselect other check boxes.
Click [Next].
5. Other [Upgrade Device Driver Wizard] dialog box opens.
When using [Intel(R) PRO/1000CT Network Connection],specify [<CD-ROM drive
letter>:\WINNT\W2K\BC3\PRO1000\WIN2K].
Then click [OK].
6. Click [Next].
7. Click [Finished].
After re-installing the network drivers, the link speed and Duplex mode need to be
specified.
Refer to "Network Driver" described earlier.
To Next Page
Loading...
