Appendix A
Specifications
NEC Express5800/120Lh
Item
N8100-941F N8100-942F N8100-943F
Type Intel Xeon processor
Clock/2nd cache 3DGHz/1MB 3DGHz/1MB 3.40GHz/1MB
Standard 1
CPU
Maximum 2
Chipset Intel E7520 (800MHz)
Standard 512 MB (256 MB × 2)
Maximum 16 GB (2 GB × 8, the standard DIMM must be replaced.)
Expansion unit 2 DIMMs (256MB/512MB/1GB/2GB)
Expansion times 4 times
Memory module SDRAM DIMM (DDR333
*1
, Unbuffered type)
Memory
Error check ECC
Graphics (VRAM) ATI RADEON 7000 (VRAM 8MB)
Floppy disk (standard) 3.5-inch drive × 1 (standard)
Hard disk (standard) None
Hard disk (maximum) 879GB (146.5GB × 6)
1.3TB (146.5GB × 9)
*2
Auxiliary
storage
device
CD-ROM (standard) ATAPI interface × 1 (x40 speed)
5.25-inch file bay 4 slots (An ATAPI CD-ROM drive is factory-installed.)
3.5-inch disk bay 1 slot (A 1.44MB-floppy disk drive is factory-installed.)
Additional PCI slot 6 slots (2 for PCI EXPRESS (8-bus), 1 for 64-bit/133MHz PCI-X, 2 for
64-bit/100MHz PCI-X, and 1 for 32-bit/33MHz PCI)
RAID 0/1 (standard), 5 (option)
Keyboard MINI DIN 6-pin connector (1 port)
Mouse MINI DIN 6-pin connector (1 port)
USB 4-pin (2 ports)
Serial D-sub 9-pin (1 port)
Parallel IEEE1284 standard, D-sub 25-pin (1 port)
Network RJ-45 (2 ports, 1000BASE-T/100BASE-TX/10BASE-T)
External
interface
Display MINI D-sub 15-pin (1 port)
Cabinet design Desk-side, mini tower
External dimensions
(including stabilizers)
941F: 292.1 (width) × 683 (height) × 453 (depth) mm
942F/943F: 292.1 (width) × 696.5 (height) × 453 (depth) mm
Weight 20 kg (Max. 35 kg)
Power supply 100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 Hz
Redundant power supply – 1+1
Power consumption 670 VA, 660 W
Temperature 10 to 35°C (operating), -10 to 55°C (non-operating, storage)Environmental
requirements
Humidity 20 to 80% RH (no condensation)
*1 DDR266 when six or more DIMMs are installed.
*2 The optional HDD cage is installed.
To Next Page
Loading...
