Upgrading Your Server 9-31
Installation
Install a board connected to a PCI board slot in the following procedure.
IMPORTANT:
For ease of installation, remove the external SCSI cable when
installing the full-length PCI card.
3.3V or universal PCI boards can be installed in PCI board slots #2,
#3, and #6.
5V or universal PCI boards can be installed in PCI board slot #1.
NOTE: To install a PCI board, make sure that the board connecting
section is engaged with the connector of the PCI board slot.
List of optional devices and their available slots
PCI #1 PCI #2 PCI #3 PCI #4 PCI #5 PCI #6
Slot
32-bit/
33MHz
64-bit/
100MHz
PCI EXPRESS
64-bit/
133MHz
Slot size Full-height
Voltage 5V 3.3V
P/N
Board
name
Available board size Long/short
N8103-65F
SCSI Controller
√√√
––
√
N8503-56F
SCSI Controller
√√√
––
√
N8103-75F
SCSI Controller
√√√
––
√
N8103-86F
Disk Array Controller (0ch) –
√
––––
N8103-80F
Disk Array Controller (1ch)
√√√
––
√
N8103-81F
Disk Array Controller (2ch)
√√√
––
√
N8190-105
Fibre Channel Controller
√√√
––
√
N8104-111
100BASE-TX Adapter
√√√
––
√
N8104-86
100BASE-TX Adapter (2ch)
√√√
––
√
N8104-103
1000BASE-T Adapter
√√√
––
√
N8104-113
1000BASE-T Adapter (2ch)
√√√
––
√
N8104-112
1000BASE-SX Adapter
√√√
––
√
N8191-07
ICMB Connector
√√√√√√
attached to
N8115-02
PCI bracket for Advanced Remote
Management
√√√√√√
√: Installation enabled, –: Installation disabled
To Next Page
Loading...
