Configuring Your Server 4-11
Option Parameter Description Your Setting
Parallel ATA Disabled
Channel 0
Channel 1
[Enabled]
Selects parallel ATA is enabled or
disabled.
Serial ATA Disabled
[Enabled]
Selects whether the serial ATA is
enabled or disabled.
[ ]: Factory-set
Advanced Chipset Control
Option Parameter Description Your Setting
Enable Multimedia
Timer
[No]
Yes
Specify whether the system supports
the multimedia timer feature.
Wake On
LAN/PME
Disabled
[Enabled]
Specify whether the remote power-on
function through embedded NIC, PCI
devices in slots 1 to 5 is enabled or
disabled.
Wake On Ring [Disabled]
Enabled
Specify whether the remote power-on
function through a serial port is
enabled or disabled.
Wake On RTC
Alarm
[Disabled]
Enabled
Specify whether the remote power-on
function by using RTC alarm feature is
enabled or disabled.
[ ]: Factory-set
To Next Page
Loading...
