NEC G355 - Reading a Sent Message; Forwarding a Sent Message

Messaging
105
Reading a sent message
To read a sent message, perform the following steps:
1. Open the Sent messages menu as shown in
Accessing the Sent Messages menu (page
104).
2. Highlight the required message.
3. Press the View soft key.
Optional step(s):
4. Scroll the text of the message in case the
message doesn‟t completely fit on the display.
5. Press the Clr key one or more times to return
to the idle display.
Forwarding a sent message
To forward a sent message, perform the following steps:
1. Open the Sent messages menu as shown in
Accessing the Sent Messages menu (page
104).
2. Highlight the required message.
3. Press the More soft key.