4. Press the Turn off soft key.
5. Press the Clr key one or more times to return
to the idle display.
Assigning or change a recurrent alarm
To assign a recurrent alarm, perform the following steps:
1. Open the Alarms menu as shown in
Accessing the Alarms menu (page 129).
2. Highlight the Recurrent alarm option.
3. Press the Select soft key.
4. Use the Keypad: Enter the alarm time.
5. Press the Continue soft key.
6. Highlight the required day of the week.
7. Press the Mark soft key to select the required
day of the week. (Note: selected days will be
marked with a green bullet).
To Next Page
Loading...
