5. Press the Clr key one or more times to return
to the idle display.
Disabling Bluetooth connectivity
To disable Bluetooth connectivity, perform the following steps:
1. Open the Bluetooth configuration menu as
shown in Accessing the Bluetooth
configuration menu (page 208).
2. The first menu option should be Enabled.
3. Press the Select soft key.
4. Press the Yes soft key.
5. Press the Clr key one or more times to return
to the idle display.
Adding the Bluetooth headset
To add the Bluetooth headset, perform the following steps:
1. Open the Bluetooth configuration menu as
shown in Accessing the Bluetooth
configuration menu (page 208).
2. Enable Bluetooth if it is disabled as shown in
Enabling Bluetooth connectivity (page 208).
3. Start pairing mode on your Bluetooth headset
(refer to yourt headset documentation).
To Next Page
Loading...
