NEC G355 - Assigning the Silent Charging Feature

Telephone settings
192
:
:
10. Highlight the required value for the option.
11. Press the Select soft key.
12. Press the Clr key one or more times to return
to the idle display.
Assigning the Silent charging feature
Activate the Silent charging feature if you do not want the handset to
ring or vibrate while in the charger. Operation returns to normal when
you lift the handset from the charger.
The Silent charging feature can be set to the following:
Off to disable the feature
Discon. to disconnect from the communication system while in
the charger (incoming calls will be redirected to an alternative
destination if that feature is supported by the communication
system)
Silent to turn off the vibrator (G955 and I755 DECT Handset
only) and ringer while in the charger (so incoming calls are still
arrivinig at your DECT handset)
Note that the Auto answer mode remains active independent of the
setting of Silent charging.
To assign the Silent charging feature, perform the following steps:
1. Open the Calls menu as shown in Accessing