9. Use the Keypad: Enter the name.
10. Press the Save soft key.
11. Press the Clr key one or more times to return
to the idle display.
OR
5. Choose the Lookup contact option.
6. Press the Select soft key.
7. Highlight the required contact.
8. Press the Select soft key.
9. Press the Clr key one or more times to return
to the idle display.
Editing entries in the Caller filter list
To edit entries in the Caller filter list, perform the following steps:
1. Open the Caller filter menu as shown in
Accessing the Caller filter menu (page 177).
2. Highlight the List option.
To Next Page
Loading...
