4. Highlight the required value for the option.
5. Press the Select soft key.
6. Press the Clr key one or more times to return
to the idle display.
Configuring alert volume
Use this function to change the alert volume.
To change the alert volume, perform the following steps:
1. Open the Sounds and alerts menu as shown
in Accessing the Sounds and alerts menu
(page 155).
2. Highlight the Alert volume option.
3. Press the Select soft key.
4. Adjust the Volume level.
5. Press the Ok soft key.
6. Press the Clr key one or more times to return
to the idle display.
To Next Page
Loading...
