Handset accessories
200
To uninstall the belt clip, perform the following steps:
1. Place the handset facedown on a flat surface.
2. Use the plastic tool to unlock the belt clip fastening.
3. The plastic tool is shipped in the box with the handset.
4. Slide the belt clip upward.
5. Remove the belt clip.
6. Remove the plastic tool.
7. Install the belt clip compartment cover as shown in Figure 17.
Figure 17: Installed belt clip compartment cover
CAUTION
Only use the plastic tool that is shipped with your
G355/G955 to unlock the belt clip or the belt clip
compartment cover. Using anything else, like a
screwdriver, can damage your DECT handset and will
void any warranty!
To Next Page
Loading...
