16
Installation and Connection
2-4. Connecting the power cord
After making certain that the main power switch of your projector is OFF, connect the power cord to a
200 to 240VAC three-prong outlet (grounded).
CAUTION
• Please contact your dealer/distributor to perform the wiring for connection of the power cord to your projec-
tor.
• Be sure to ground the equipment to ensure safety.
To avoid electric shocks, request a professional to carry out the grounding.
Be sure to perform earth connection before inserting the power plug into the wall outlet.
NOTE
• In the following instances, do not disconnect the power plug from the outlet. Otherwise, trouble may occur:
• When the fan is running (for about three minutes) after the power is turned off.
• When using a Flash Memory card or LAN card, the card may be damaged.
200-240 VAC
three-prong outlet
To Next Page
Loading...
