NEC iS8-2K - 4 Using Menus; Basic Operation with Adjustment Menus

23
Adjustment Menus
4. Using Menus
4-1. Basic operation with adjustment menus
You make adjustments of your projector by displaying menus on the LCD screen on the projector
body.
䡵 Operating menus
Preparation: Turn your projector on. (See page 17)
1 Press the MENU button on the control panel of your projector.
A menu is displayed on the LCD screen.
2 Select “Information” by pressing the SELECT button.
• At each press of the SELECT button, the display will cycle as “Source Select” ←→
“Setup” ←→ “Information.”
3 Press the SELECT button.
The submenu “Lamp Time” of “Information” is displayed.
• The menu item can be selected by pressing the ENTER button instead of the SELECT
button.
• To return to the previous state, press the SELECT
button or the CANCEL button.
4 Select the submenu “Version” by pressing the SELECT button.
• At each press of the SELECT button, the display will cycle as “Lamp Time”←→
“Version”←→ ”Error Code.”