7
Checking the Supplied Items and the Names of the Projector Parts
9. SHUTTER button
Press the SHUTTER button while depressing the CTL button, then the lens shutter will operate to
shut off the light for projection. Press this button again while depressing the CTL button to cancel
the operation of the lens shutter.
10. CTL button
Press the CTL button together with the FOCUS +/- button, ZOOM +/- button, LENS SHIFT
button and SHUTTER button.
The FOCUS +/-, ZOOM +/-, LENS SHIFT
and SHUTTER buttons do not function
when pressed alone.
11. POWER button
Press this button to turn on or off (standby) the power to your projector.
When turning on the power to the projector, first set the main power switch to ON, thereby setting
the projector in a standby state. (See page 17)
12. POWER indicator
13. STATUS indicator
14. BACKLIGHT switch
Operate this switch to turn on the back light of the LCD screen.
15. LCD CONTRAST Adjustment Dial
Use this dial to adjust the contrast of the LCD screen.
Green lighting When power is on.
Green blinking When the lens shutter is closed.
Orange lighting When power is off (in standby state).
Orange blinking When the cooling fan(s) is running immediately after power-off.
Off When the projector is operating normally.
Green lighting When power is off (in standby state).
Red blinking When an error has occurred. An error code is displayed on the LCD screen.
To Next Page
Loading...
