English
English-29
OSM Controls - continued
YEAR
MONTH
DAY
TIME
DAYLIGHT SAVING
SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting:
OFF TIMER, SCHEDULE SETTINGS.
PIP
KEEP PIP MODE
Allows the monitor to remain in “PIP” mode after powering off. When Power is returned,
PIP appears without having to enter the OSM.
PIP MODE Picture-in-Picture
OFF
PIP
POP
SIDE BY SIDE (ASPECT)
SIDE BY SIDE (FULL)
PIP SIZE Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
SMALL
MIDDLE
LARGE
PIP POSITION Determines where the PIP appears on the screen.
PIP RESET Resets the following settings within the PIP menu back to factory setting:
KEEP PIP MODE, PIP MODE, PIP SIZE, PIP POSITION.
OSM LANGUAGE Select the language used by the OSM.
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
OSM TURN OFF Turns off the OSM after a period of inactivity. The preset choices are 10-240 seconds.
OSM POSITION Determines the location where the OSM appears on the screen.
UP
DOWN
LEFT
RIGHT
INFORMATION OSM Selects whether the information OSM is displayed or not. The information OSM will be
displayed when the input signal or source changes. The information OSM will also give
a warning when there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSM to appear is available.
MONITOR INFORMATION Monitor Information.
To Next Page
Loading...
Need help?
General