To Next Page

To Previous Page

English-17

English

Connecting a USB device with USB port

USB1: USB downstream port (Type-A).

Connect a USB compatible ﬂ ash memory or a keyboard to Down Stream Port.

USB2: USB upstream port (Type-B).

Connect to a USB compatible computer with a USB cable.

A USB compatible computer connected to USB2 can control the devices connected to USB1.

USB CM1 (2A): Power supply port.

Please refer to the speciﬁ cations page for power supply information (see pages 64, 65, 66, 67, 68 and 69).

USB CM2: Service port.

Please do not connect devices.

USB MP: USB downstream port (Type-A).

To use Media player function, please use this port.

• Please make sure the connector shape and orientation when connecting the USB cable.

• Depending on the use of computer BIOS, OS or device, USB function may not working. In this case, please check user’s

manual of your computer or device, or contact your supplier for detail information.

• Before turning off the main power switch of the monitor or shutting down Windows

, please turn off the USB function and

remove the USB cable from the monitor. You may lose data when the computer crashes.

• It may take few seconds the monitor recognizes USB input. Do not eject USB cable or eject and insert USB cable before

monitor recognizes the input.

• You can set power supply for USB CM1 (2A) at USB POWER in the OSD menu (see page 42).

• Please refer to the USB in the OSD menu (See page 42) for the USB setting.

NOTE: USB CM1 (2A) and USB CM2 are not corresponding port.

Please refer to the connection (See page 15) to connect USB devices to the monitor.

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync P404 and is the answer not in the manual?

NEC MultiSync P404 Specifications

General

Panel life	- h
Panel type	SPVA
Pixel pitch	- mm
Response time	8 ms
Display diagonal	40 \
Display brightness	700 cd/m²
Display technology	LCD
Vertical scan range	24 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
LED backlighting type	Edge-LED
Supported video modes	720p, 1080p
Contrast ratio (typical)	4000:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	101.6 cm
Active display area (W x H)	885.6 x 498.2 mm
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1280 x 960, 1360 x 768 (WXGA), 1366 x 768, 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 1920 x 2160, 3840 x 2160, 4096 x 2160
USB version	2.0
USB ports quantity	5
DisplayPorts quantity	3
Compatible memory cards	MicroSD (TransFlash), MicroSDHC
Ethernet LAN data rates	100 Mbit/s
VGA (D-Sub) input ports	1
HDMI input ports quantity	2
Multi-display supported	-
Operating hours (hours/days)	24/7
Power consumption (standby)	3 W
Power consumption (typical)	90 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Orientation	Horizontal/Vertical
Product color	Black
Product design	Digital signage flat panel
Bezel width (bottom)	13.2 mm
Panel mounting interface	300 x 300 mm
Sustainability certificates	RoHS, ENERGY STAR
Certification	C-tick; CE; EMC B; FCC; PSB; TÜV GS; UL/C-UL/CSA; VCCI
RMS rated power	20 W
Cables included	AC, DVI
Audio formats supported	MP3, WAV
Image formats supported	JPG, PNG
Video formats supported	FLV, H.264, MOV, MP4, MPEG1, MPEG2, MPG, WMV
Harmonized System (HS) code	85285210