English−34
Showing the Information OSD
The Information OSD provides information such as: Input Source, Picture Size, IP Address, Monitor ID, etc.
Press the DISPLAY button on the remote control to bring up the Information OSD.
A Input name
B Audio input name
C Picture aspect
D Input Signal Information
E Multi-Picture information
F Communication Info
Switching Between Picture Modes
Press the PICTURE MODE button on the wireless remote control to cycle through the SpectraView Engine picture modes
from 1 to 5.
The picture modes are pre-configured with settings for general use. See “Advanced Color Adjustment” on page 47 for
instructions on changing the picture mode settings.
To Next Page
Loading...
