Degauss: Select the degauss icon on “Icon select window” and push “SELECT”
button. It will eliminate the stray magnetic field and correct the scan
the electron beam, and will affect the purity, focus, convergence.
Caution: Allow a minimum interval of 20 minutes to elapse between
uses of the degauss function.
9300KColor Temperature: Select the Color Temperature icon on “Icon Select Window”
and push “SELECT” button.
It can be switched the different color Temperature.
OSD: There are 3 background colors (Blue, Black, and white).
These can be selected by “SELECT” button after the selection of
“OSD” on “Icon select window”.
exit EXIT: To exit the OSM window. Select EXIT on “Icon select
window”. Then push “SELECT” button to exit OSM window.
Note: If you do not push buttons over 10 seconds in OSM condition, the window will
automatically disappear.
11
To Next Page
Loading...
Need help?
General