NEC NC1201L-A - Page 38

38
4. Using Menus
6
Press the DOWN button.
The submenu “Model” another rank lower than “System” is displayed.
7
Press the LEFT/RIGHT button to select the submenu “Release Package.”
At each press of the LEFT/RIGHT button, the display will cycle as “Model” ←→ “Serial No.” ←→ “Release Package”
←→ “Kernel” ←→ “U-Boot” ←→ “System Files” ←→ “Cinema Firmware” ←→ “Cinema Data” ←→ “ICP Firmware”
←→ “ICP ConfigFile” ←→ “FMT FPGA” ←→ “Slave BIOS” ←→ “Slave Firmware” ←→ “Slave Data” ←→ “SSL FPGA”
←→ “Secure Processor” ←→ “Laser Driver” and each version information is displayed.
8
Press the UP button several times.
At each press of the UP button, the display will return to a menu one level above.