58
6. Appendix
6-2-3. DOUSER indicator
Indicator condition Projector condition Note
Steady light Green The douser is closed. -
Off The douser is opened. -
6-2-4. TEMP. indicator
Indicator condition Projector condition Note
Steady light Red The projector temperature rises close to the operating
temperature limit.
An error message is displayed
in the LCD screen.
Check the content of the error.
Blinking light Red The projector temperature exceeded the operating
temperature.
An error message is displayed
in the LCD screen.
Check the content of the error.
6-2-5. LIGHT indicator
Indicator condition Projector condition Note
Off The light source is off. -
Blinking light Green The ON/OFF of the light source cannot be operated. -
Steady light Green The light source is on. -
6-2-6. POWER indicator
Indicator condition Projector condition Note
Off The projector power supply is off. -
Blinking light Orange While the projector software is starting Wait for a moment.
Green
(cycles of 1)
(Note 1)
Preparing to turn power on/cooling fan rotating
(State from turning the power off to entering standby
mode).
Wait for a moment.
Green
(cycle of 3 seconds)
(Note 2)
When the sleep timer is activated -
Steady light Green The projector is turned on. -
Orange The projector is in standby. -
(Note 1) Repeats 0.5 seconds on → 0.5 seconds off.
(Note 2) Repeats 2.5 seconds on → 0.5 seconds off.
6-2-7. POWER (BOOT) indicator
Indicator condition Projector condition Note
Steady light Blue While the projector software is starting Wait for a moment.
Blinking light Blue Wait for a moment.
Off The projector power supply is on, or the projector is in
standby.
-
To Next Page
Loading...
