68
6. Appendix
6-7. Power Cable
NOTE
Ask your dealer for the power cable to select and purchase.
Power Cable Electrical Specication
The projector is equipped with an IEC60320 C20 inlet to connect an AC power supply cable. Use an IEC60320 C19 compliant
AC power cable connector and ensure that the connector has the current capacity as shown below.
Power supply voltage Projector input current Power cable current capacity
AC 200–240V 9.2 A 250V 15A or higher
Type of Power Cable
Cable
Plug
Connector
Use plugs, cables, and connectors that are suitable for the regulations of the country of installation, as shown in the following
table.
• For users in North America
Use a power cable no longer than 4.5m/14.76 ft according to National Electrical Code.
• For UK only: In UK, a BS approved power cord with moulded plug has a Black (15 Amps) fuse installed for use
with this equipment. If a power cord is not supplied with this equipment please contact your supplier.
Germany
Plug Cable Connector
CEE 7
H05VV-F 3G1.5 IEC 320 C19
USA
Plug Cable Connector
NEMA 6-15P
SJT 3 x AWG 14 IEC 320 C19
To Next Page
Loading...
