NEC NC1201L-A - Resetting the Air Filter Usage Time

55
5. Maintenance of Your Projector
7
Clean the other intake vent air lters in the same way.
NOTE
• Before turning on the power, make sure that all filter covers are in place. If they are not fitted properly dust could
get inside the projector causing it to malfunction.
• Reset “FilterCleaning Time” after cleaning the filters. (See this page)
5-3-2. Resetting the Air Filter Usage Time
1
Turn on the power to the projector.
2
Reset the displayed message by selecting “Conguration” → “Reset”.
Select “Configuration” → “Reset” → “Filter Cleaning” in the adjustment menu. “FilterCleaning Time” message on the
LCD screen is turned off.
This completes resetting the air filter usage time.