51
5. Maintenance of Your Projector
Remove the lters.
1. Turn the tabs to the left position and slide the top lter to the right.
Tab
Tabs in the rear
If it is stuck, slowly inserting the tip of a Phillips head screwdriver into the gap in a few places will loosen it.
NOTE
Do not apply a high degree of force or attempt to pry it open. This could deform the flange making it impos-
sible to reattach the filter cover.
2. With the tabs still on the left-facing position, remove the lter inside by pulling it toward you.
All three layers of the filter will come out.
To Next Page
Loading...
