NEC NEAX 2000 IPS - Page 84

NEAX 2000 IPS Configuration Guide
Page 74 NDA-24347, Issue 1
Dterm IP Setup Chapter 7 Dterm IP
.
Table 7-2 Administrator Menu Items
MENU
NO.
INDICATION SETTING DATA DESCRIPTION
1 Dterm IP Mode
1: Normal
2: Remote
Set when the Dterm IP is
connected to the HUN/
Router on the LAN.
Set when the Dterm IP is
connected to the HUB/
Router via Internet/Intranet.
2 Download Address XXX.XXX.XXX.XXX
Enter the TFTP/FTP Server
Address when the server is
provided on the LAN.
3 LM Address - Not available
4 Area ID
0: Automatic
1: Japan
2: Australia
3: North America
4: Others
5: Hong Kong
6: Malaysia
7: Singapore
8: England
9: Mexico
10:Taiwan
11:New Zealand
12:Korea
Enter your country/area ID
number.
5 Port
1. DRS
Mate-port
XXXXX
Enter the DRS Mate-port
number for DRS
System-based.
Note 1, Note 2
2. LM
Mate-port
- No setting is required.
3. DRS
and LM
Self-port
XXXXX
Enter the DRS Self-port
number.
Note 1
LM Self-port setting is not
required.
4. PROTIMS
Self-port
XXXXX
Enter the DRS Self-port
number.
Note 1