NEC NLT-19HDDV3 - Connecting Headphone; Connecting PC (DTV); Connecting Digital Audio (26 Inch Model Only); Connection to External Equipment

Connection to External equipment
14
Connecting PC (DTV)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the RGB IN socket of the set.
Connect the audio cable from the PC to the AUDIO IN sock-
ets of the set.
Press the INPUT button to select
PC-RGB.
Switch on the PC, and the PC screen appears on the set.
Do PC Auto on Menu to adjust the screen automatically.
The set can be operated as the PC monitor.
RGB-DTV input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,
720p-60Hz, 1080i-50Hz, 1080i-60Hz.
RGB OUTPUTRGB OUTPUT
(R) (R) AUDIO (L)AUDIO (L)
AUDIO IN
(RGB/DVI)
RGB IN (PC/DTV)
HDMI(DVI)
S-VIDEO
IN
< Back panel of the set >
or
Connecting Headphone
Insert the headphone plug to the headphone socket of the
set.
You can listen to the sound through the headphone. To
adjust the headphone volume, press the button.
Control the volume of the headphone to the appropriate
level.
Hearing for a long time with the high volume may damage
the eardrum.
Audio Out (26inch model only) : Connect a second TV or
Monitor.
< Side panel of the set >
Connecting Digital Audio (26inch model only)
- Send the set’s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical).
Caution : Do not look into the optical output port. Looking at
the laser beam may damage your vision.
How to connect
Connect one end of an optical cable to the TV Digital Audio
(Optical) Output port.
Connect the other end of the optical cable to the digital audio
(optical) input on the audio equipment.
HDMI(DVI)-1 HDMI(DVI)-2
DIGITAL AUDIO
(OPTICAL) OUT
< Back panel of the set >
* 26 inch model only