NEC NLT-19HDDV3 - Calling the Programme Table

Setting up TV stations
21
Calling the programme table
Skipping a programme number
Select a programme number to be skipped with the
DD
/
EE
or FF / GG button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be unable to select it using the
DD
/
EE
button during normal TV viewing.
If you want to select the skipped programme, directly enter the programme number with the
NUMBER buttons or select it in the programme edit or table menu.
Repeatedly press the MENU button to return to normal TV viewing.
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme table
contains ten programmes as picture.
You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the programme
table indicate there is no station name assigned.
Displaying programme table
Select a programme with the
DD
/
EE
or FF / GG button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting a programme in the programme table
There are 10 programme table pages which contain 100 programmes.
Pressing the
DD
/
EE
or FF / GG button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
Paging through a programme table
0 C 04 5 - - - - -
1 S 03 6 - - - - -
2 S 04 7 - - - - -
3 C 06 8 - - - - -
4 C 33 9 - - - - -
8 - - - - -
E DD
F GG OK MENU