NEC NLT-19HDDV3 - Basic Operation

Basic operation
15
On and Off
First, connect power cord correctly.
At this moment the TV switches to standby mode.
If the set is in standby mode, press the POWER, buttons on the remote control handset to switch
it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the power button again to switch the set standby mode.
Programme selection
You can select a programme number with the or NUMBER buttons.
Volume adjustment
Press the button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
You can cancel it by pressing the MUTE, , SSM or I/II button.
On screen language selection
Press the MENU button and then use
DD
/
EE
button to select the SETUP menu.
Press the
GG button and then use
DD
/
EE
button to select Language.
Press the
GG button and then use
DD
/
EE
button to select your desired language.
All the on screen displays will appear in the selected language.
Repeatedly press the MENU button to return to normal TV viewing.