DVD player operation
57
When viewing video file
- When you press the STOP button once when the video is played, the symbol will be
displayed on the screen and the video stopped. When you press the PLAY button, the RESUME
function will operate to play the title. When you press the STOP button again when the
symbol is displayed on the screen, the symbol will be displayed and the video file stopped to
show the video file explorer screen.
- When operating REV/FWD for the video file, the sound is not played when it is over a specific
speed.
- The play speed displayed on screen may differ from the actual play speed.
- The file may not be played depending on the type and storage method of the DivX file.
- Unless the video/audio data structure of the recorded file is interleaved, only one, video or audio,
will be played.
- When the number of frames shown the screen per second is over 30, it may not be played
normally.
[ Note ]
Insert the Divx file CD into the CD-ROM inserting
slot with the signal recorded side facing forward.
You will see “READ” displayed on the main
screen and the CD will start operating.
After moving to the video list using the
FF
/
GG
button, select the video file you want with the
DD
/
EE
button.
When you press the PLAY button, the selected
video will be executed.
- DVD player plays the Divx file. (But, when finalized.)
-Type of DivX that can be played : avi, mpg, mpeg
-Type of codec format that can be played : VIDEO-DivX3. 11, 4. x, 5. x, AUDIO-AC3,
MP3 (80kbps~320kbps)
GG
GG
[DIVX] Documents.AVI
01. DIVX
02. Settings.AVI
03. Combo.AVI
04. Set top.AVI
D
E
01. Documents.AVI
To Next Page
Loading...
